EcoMortar®
Technical data sheet
Pre-mixed Natural Hydraulic Lime mortars for building, rendering and finishing coats in a variety of colours
The absence of cement, ashes and other pozzolanic additions together with its other qualities, make EcoMortar® highly suitable for repair and conservation work on traditional, vernacular and historic buildings. In new build the properties of EcoMortar® will allow joint free construction, dispersion of condensation and will accommodate small settlement movements.
Eco-friendly characteristics :
– high vapour exchange qualities
– produced with lower energy than cementitious mixes
– re-absorption of CO2 in curing
– will not deteriorate timber
– possibility of recycling the materials used in building
– elimination of painted finishes
| Units | with NHL 3.5 | with NHL 2 and Finish WP (with NHL 3.5) | |
|---|---|---|---|
|
Dry bulk density |
kg/m3 |
1400 |
1400 |
|
Compressive strenght 7 days |
N/mm2 |
1.2 |
1.0 |
|
28 days |
|
1.9 |
1.5 |
|
90 days |
|
3.6 |
3.0 |
|
Elasticity Moduli |
MPa |
5000 |
4000 |
|
Vapour Permeability |
g.m2.hour.mmHg |
0.85 |
0.89
WP = 0.85 |
|
Capillarity
Type C and F
Type WP |
g.m2.min-1/2 |
1 - 2 |
W2 - 3
0.2 |
Granulometries (maximum grain size)
EF = 0.8mm TF= 1.3mm F= 1.8mm M= 2.5mm
Type WP only available in EF and TF.
Consult the Colour chart.